ipmitool commands worth remembering
A short cheat sheet for talking to a server's BMC: sensors, the event log, power control and network settings.

Every server vendor has its own management interface, and all of them still answer plain IPMI. These are the commands I use most.
Local or remote
On the machine itself, ipmitool talks to the BMC through the kernel driver. Over the network, add the connection options:
export IPMI_PASSWORD='...'
ipmitool -I lanplus -H bmc.example.net -U admin -E chassis status
The -E flag reads the password from the IPMI_PASSWORD variable, which keeps it out of the process list and the shell history.
Sensors
ipmitool sdr elist # every sensor with its state
ipmitool sdr type Temperature # only temperatures
ipmitool sdr type Fan # only fans
ipmitool sensor get "CPU1 Temp" # one sensor with its thresholds
System event log
The SEL is where the BMC records ECC errors, power supply failures and chassis intrusion. Read it before opening a hardware ticket.
ipmitool sel info # how full the log is
ipmitool sel elist # entries with decoded sensor names
Power
ipmitool chassis power status
ipmitool chassis power cycle # hard off, then on
ipmitool chassis power soft # ACPI shutdown request
ipmitool chassis bootdev pxe # boot from network once
BMC itself
ipmitool mc info # firmware version
ipmitool lan print 1 # IP, netmask, gateway, MAC
ipmitool mc reset cold # restart a hung BMC, the host keeps running